User Manual

5
Chapter 2
Installation
This Chapter covers the physical installation of the HomePlug 802.11g Ac-
cess Point.
Requirements
Requirements:
• TCP/IP network protocol
• HomePlug network
• Installed Wireless network adapter for each PC that will be wirelessly connected to the
network
Procedure
1. Select a suitable location for the installation of your HomePlug 802.11g Access Point. To
maximize reliability and performance, follow these guidelines:
• Use an elevated location if possible. This will assist the wireless range and throughput.
It may be advisable to use an extension cord if all your power points are located at
floor level.
• Place the HomePlug 802.11g Access Point near the center of your wireless coverage
area if possible.
• If possible, ensure there are no thick walls or metal shielding between the HomePlug
802.11g Access Point and Wireless stations.
Figure 3: Installation Diagram
2