User's Manual

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless Router.

Requirements

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

• TCP/IP protocol must be installed on all PCs.

• For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable

modem (for WAN port usage)

• To use the Wireless Access Point, all Wireless devices must be compliant with the

IEEE802.11a, IEEE802.11b or IEEE802.11g specifications.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless Router.

Ensure the Wireless Router and the DSL/Cable modem are powered OFF.