User's Manual

Wireless Router User Guide

Wireless Screen

The Wireless Router's settings must match the other Wireless stations.

Note that the Wireless Router will automatically accept both 802.11b and 802.11g connections,

and no configuration is required for this feature.

To change the Wireless Router's default settings for the Wireless Access Point feature, use the

Wireless link on the main menu to reach the Wireless screen. An example screen is shown below.

Figure 7: Wireless Screen

Data - Wireless Screen

Access Point

Enable Access

Poi nt

· If Enabled, wireless stations will be able to use this Access Point.

· If Disabled, the wireless interface is disabled, and will neither

transmit or receive wireless traffic.

Broadcast SSID If Enabled, the SSID will be broadcast its name to all Wireless Stations.

Stations can then see this Access Point in their list of "Available

networks", and can adopt the correct SSID for connections to this

Access Point.

Station name On your PC, some Wireless status screens may display this name as the

Access Point in use.

Region The region can not be changed by users