User's Manual

Setup
19
Band
2.4GHz To use the 2.4GHz band, select this radio button, then the desired
option:
• 802.11g & 802.11b - This is the default, and should normally be
used.
• 802.11g only - If selected, this ensures that "g" mode stations will
connect at high speed, but "b" mode stations will be unable to
connect at all.
• 802.11b only - If selected, 802.11g mode is unavailable. 802.11g
mode stations will only be able to connect if they are fully back-
ward-compatible with 802.11b mode.
Network Name
(SSID)
Enter the desired network name for the 2.4GHz (802.11b/g) band. To
communicate, all Wireless stations must use the same SSID/ESSID.
5GHz Select this radio button if you wish to use the 5GHz band. This will
allow 802.11a connections to this Access Point.
Network Name
(SSID)
Enter the desired network name for the 5GHz (802.11a) band. To com-
municate, all Wireless stations must use the same SSID/ESSID.
Wireless Security
Current Setting The current security setting is displayed.
Configure
Button
Click this button to access the Wireless security sub-screen, and
modify the security settings as required.
MAC Level Access Control
Allow LAN
access
This feature can be used to prevent unknown Wireless stations from
accessing your LAN. The available options are:
• All Wireless Stations - All wireless stations can use the access
point to access your LAN.
• Selected Wireless stations only - Only selected wireless stations
access your LAN. To select the required wireless stations, click the
"Select Stations" button.
Allow Internet
access
This feature can prevent unknown Wireless stations from using the
Wireless Router to access the Internet. The available options are:
• All Wireless Stations - All wireless stations can use the access
point to access the Internet.
• Selected Wireless stations only - Only selected wireless stations
can use the access point to access the Internet. To select the re-
quired wireless stations, click the "Select Stations" button.