User's Manual

Wireless Router User Guide
40
need to change it, this setting is on the WAN Port screen.
Connection Details
Button
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "Connection Log" may also be available.
LAN
IP Address The IP Address of the Wireless Router.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function - either "En-
abled" or "Disabled".
For additional information about the PCs on your LAN, and the IP
addresses allocated to them, use the PC Database option on the
Administration menu.
Wireless
Network Name The current Network name or SSID. If using an ESS (Extended
Service Set, with multiple access points) this ID is called an ESSID
(Extended Service Set Identifier).
Band/Mode The current band (24.GHz or 5GHz) and 802.11 mode are displayed
here.
Security This indicates the Wireless security system currently used.
System
Device Name This displays the current name of the Wireless Router.
Firmware Version The current version of the firmware installed in the Wireless
Router.
Buttons
Connection Details View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
System Data Open a sub-window containing additional data about the system
status and configuration.
Restart Clicking this button will restart (reboot) the Wireless Router. All
existing connections though the Wireless Router will be termi-
nated, but will usually re-connect automatically.
Refresh Screen Update the data displayed on screen.