User's Manual

Operation and Status

Connection Status - PPPoE

If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when

the "Connection Details" button is clicked.

Figure 25: PPPoE Status Screen

Data - PPPoE Screen

Connection

Physical Address The hardware address of this device, as seen by remote devices

on the Internet. (This is different to the hardware address seen by

devices on the local LAN.)

IP Address The IP Address of this device, as seen by Internet users. This

address is allocated by your ISP (Internet Service Provider).

Network Mask The Network Mask associated with the IP Address above.

PPPoE Link Status This indicates whether or not the connection is currently estab-

lished.

• If the connection does not exist, the "Connect" button can be

used to establish a connection.

• If the connection currently exists, the "Disconnect" button

can be used to break the connection.

Connection Log

• The Connection Log shows status messages relating to the