User's Manual

Wireless Router User Guide

IP Address The IP Address of this device, as seen by Internet users. This

address is allocated by your ISP (Internet Service Provider).

Connection Status This indicates whether or not the connection is currently estab-

lished.

• If the connection does not exist, the "Connect" button can be

used to establish a connection.

• If the connection currently exists, the "Disconnect" button can

be used to break the connection.

• Normally, it is not necessary to use the Connect and Discon-

nect buttons unless the setting "Connect automatically, as

required" is disabled.

Connection Log

• The Connection Log shows status messages relating to the

existing connection.

• The Clear Log button will restart the Log, while the Refresh

button will update the messages shown on screen.

Buttons

Connect If not connected, establish a connection to Telstra Big Pond.

Disconnect If connected to Telstra Big Pond, terminate the connection.

Clear Log Delete all data currently in the Log. This will make it easier to read

new messages.

Refresh Update the data on screen.