User's Manual

Chapter 3

Configuration

This Chapter provides Setup details of the System.

Configuration Program

The Multiple RF Home Gateway can offer customers with seamless communication between

devices and clouds while at home or away. This gateway is designed to provide complete

connectivity with all certified devices including cameras, security systems and ZigBee/Z-

Wave/Bluetooth devices.

Preparation

Before attempting to configure the Multiple RF Home Gateway, please ensure that:

 Your PC can establish a physical connection to the Multiple RF Home Gateway. The PC

and the Multiple RF Home Gateway must be directly connected (using the Hub port on the

Multiple RF Home Gateway) or on the same LAN segment.

 The Multiple RF Home Gateway must be installed and powered ON.

 Choose the desired RF mode by using the Select button of the gateway, and then push the

Sync button for pairing the gateway and sensors. Make sure that the gateway and added

sensors are synchronized successfully before using.

Using your Web Browser

To establish a connection from your PC to the Multiple RF Home Gateway:

1. Start your WEB browser.

2. In the Address box, enter "HTTP://" and the IP Address of the Multiple RF Home Gateway,

as in this example, which uses the Multiple RF Home Gateway's default IP Address:

HTTP://192.168.0.1

3. When prompted for the User name and Password, enter values as follows:

 User name admin

 Password admin