User's Manual

LEDs

Front-mounted LEDs

The ZigBee Home Monitoring Gateway has 8 LEDs.

Reset

This button has two (2) functions:

• Reboot. When pressed and released, the ZigBee Home Monitoring

Gateway will reboot (restart).

• Clear All Data. This button can also be used to clear ALL data and

restore ALL settings to the factory default values.

To Clear All Data and restore the factory default values:

1. Power On.

2. Keep holding the Reset Button down for 8 seconds.

Release the Reset Button. The ZigBee Home Monitoring Gateway is

now using the factory default values.

WPS button

Push the WPS button on the device and on your other wireless device to

perform WPS function that easily creates an encryption-secured wireless

connection automatically.

Sync Button

Push this button to synchronize for portal server or ZigBee clients.

POWER

(Green)

• On - Power On

• Off - Power Off

• Flashing - Reboot or Firmware upgrade.

WAN (Green)

• On - Connection to the Gateway attached to the WAN (Internet)

port is established.

• Off - No connection to the Gateway.

• Flashing - Data is being transmitted or received via the connection.

WiFi & WPS WiFi

• On (Green) - Wireless connection available

• Off (Green) - No Wireless connection available.

• Flashing (Green) - Data is being transmitted or received via the

Wireless connection.