User's Manual

WPS

• On (Amber) - Problem occurred while trying to enable the

WPS function.

• On (Green) - WPS function is enabled.

• Flashing - Data is being transmitted or received via the connection.

Service

• On (Green)- Open for Sensor Binding (Add)

• Off - System is in ready mode, no sensor is needed to be bined

(added.)

• Flashing - Sensor is binding (adding)

LAN (Green)

• On (Green)- LAN connection established.

• Off - No active connection on the corresponding LAN port.

• Flashing - Data is being transmitted or received via the correspond-

ing LAN (hub) port.

HAN

• On - Zwave//ZigBee function enabled.

• Off - Zwave/ZigBee function disabled

• Flashing - Data is being transmitted or received via the connection.

USB (1~2)

• On (Green)- USB connection established.

• Off - No active connection on the corresponding USB port.

• Flashing - Data is being transmitted or received via the correspond-

ing USB port.