User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Viewing Live Video
- Chapter 4 Advanced Viewing Setup
- Chapter 5 Web-based Management
- Introduction
- Connecting to Video Server
- Welcome Screen
- Administration Menu
- System Screen
- Network Screen
- Wireless Screen (Wireless Model Only)
- DDNS Screen
- IP Filter Screen
- I/O Port Screen
- RS485 Screen
- Streamings
- Video & Audio Screen
- Video Access Screen
- User Database Screen
- Motion Detection Screen
- Audio Detection Screen
- E-Mail Screen
- FTP Screen
- HTTP Screen
- SMB/CIFS Client Screen
- Event Trigger Screen
- Maintenance Screen
- Status Screen
- Log Screen
- Chapter 6 WindowsViewing/Recording Utility
- Chapter 7 Troubleshooting
- Appendix A Specifications
- Appendix B Network Camera HTTP CGI
RS485 Screen
This screen is displayed when the RS485 menu option is clicked.
Figure 31: RS485 Screen
Data - RS485 Screen
RS485
Enable RS-485
Enable the RS-485 feature to enable pan and tilt functions for the
device.
Ports Settings
Baud Rate
Select the desired baud rate from the drop-down list. The default is
2400 bps.
Data Bits
Select the desired data bits from the drop-down list. The default is
8.
Parity
Select the desired parity from the drop-down list. The default is
None.
Stop Bits
Select the desired value from the drop-down list. The default is 1.
Address
Enter the desired address in the provided field.
Preset Position
Click this button to define the preset point position. Please see the
following section for more details.
41