User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Viewing Live Video
- Chapter 4 Advanced Viewing Setup
- Chapter 5 Web-based Management
- Introduction
- Connecting to Video Server
- Welcome Screen
- Administration Menu
- System Screen
- Network Screen
- Wireless Screen (Wireless Model Only)
- DDNS Screen
- IP Filter Screen
- I/O Port Screen
- RS485 Screen
- Streamings
- Video & Audio Screen
- Video Access Screen
- User Database Screen
- Motion Detection Screen
- Audio Detection Screen
- E-Mail Screen
- FTP Screen
- HTTP Screen
- SMB/CIFS Client Screen
- Event Trigger Screen
- Maintenance Screen
- Status Screen
- Log Screen
- Chapter 6 WindowsViewing/Recording Utility
- Chapter 7 Troubleshooting
- Appendix A Specifications
- Appendix B Network Camera HTTP CGI
Rear - Video Server
Figure 2: Rear Panel
ETHERNET port
Use a standard LAN cable to connect your Video Server to a
10/100BaseT hub or switch.
IO Ports
The terminal block includes 1 RS-485 port (2 pins), 2 GND ports, 1
input port and 1 output port.
Power Input
Connect the supplied 12V power adapter here. Do not use other
power adapters; doing so may damage the video server.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1. Video Server
2. Power adapter
3. Antennae (Wireless Model Only)
4. Installation CD-ROM
5. Quick Installation Guide
4