User's Manual

Setup using the Windows Wizard

Initial setup should be performed using the supplied Windows-based setup Wizard. This

program can locate the Video Server even if its IP address is invalid for your network. You can

then configure the Video Server with appropriate TCP/IP settings for your LAN.

Subsequent administration can be performed with your Web browser, as explained in Chapter

5 - Web-based Management.

Setup Procedure

1. Insert the supplied CD-ROM into your drive. If the setup program does not start

automatically, run NetworkCamera.exe in the root folder.

• You will see the Welcome screen shown below.

• Click the Setup button to start the setup Wizard.

Figure 3: Welcome Screen

2. The next screen, shown below, will list all the Video Servers on your LAN.

Figure 4: Camera List Screen