User's Manual
26
!
!!
! "#
"# "#
"#
This Chapter provides Setup details of the Video Server’s Web-based
Interface. This Chapter is for the video server Administrator only.
Introduction
The Video Server can be configured using your Web Browser. The Video Server must have an
IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in Chapter 2 - Basic Setup.
Connecting to Video Server
• If using only your Web Browser, use the following procedure to establish a connection
from your PC to the Video Server:
• Once connected, you can add the Video Server to your Browser's Favorites or Bookmarks.
Connecting using your Web Browser
1. Use the Windows utility to get the IP address of the Video Server.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Video Server.
4. You will then be prompted for a username and password.
• If using the default values, enter administrator for the name, and leave the
password blank.
• Otherwise, enter the Administrator ID and Administrator Password set on the
Maintenance screen.