User's Manual

43
Patrol Sequence
This feature determines how the Video Server will move when it is
set to "Rotate". You can set a number of Preset Positions; the Video
Server will go to the first position, then move through the list of
preset positions until it is finished. The Video Server will stop at
the last position in the list.
To create the Preset Sequence, select the desired Preset Position in
the left column, and click the "Add >>" button. Repeat until the
desired sequence is complete. Note that you can add the same
Preset Position more than once; this can be used to make the
camera stay longer at one position.
To delete a position from the Sequence, select the desired position
and click the "Remove" button.
Set Preset Position Screen
This screen is displayed when the Set Preset Positions button on the Pan/Tilt screen is clicked.
Figure 33: Preset Point Position Screen
Data - Preset Point Positions
Set Position
Set the desired position through adjusting the control panel.
Set Home
Click this button to set the home position of Pan/Tilt.
Preset List
Select the desired Preset. The screen will update with the current
data for the selected Preset Position.