User's Manual

4
WPS LED
(Green)
On - Wireless security is On.
Off - Wireless security is Off.
Flashing - WPS sync is in progress.
Network LED
(Green)
On - LAN connection is detected.
Off - LAN connection is not detected
Blinking - Data is being transmitted or received via the LAN
connection.
POWER LED
(Green)
On - Power on.
Off - No power.
Blinking - The POWER LED will blink during start up. This will
take 15 to 20 seconds.
Rear - Video Server
Figure 2: Rear Panel
POWER
Connect the supplied 12V power adapter here. Do not use other
power adapters; doing so may damage the video server.
ETHERNET port
Use a standard LAN cable to connect your Video Server to a
10/100BaseT hub or switch.
RS485
The terminal block includes 1 RS-485 port (2 pins)
IO Ports
The terminal block includes 8 GND ports, 4 input ports and 4 output
ports.
SD/SDHC Card
slot
Insert the SD card into the slot, if required.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1. Video Server
2. Power adapter
3. Antennae (Wireless Model Only)
4. Installation CD-ROM