User's Manual

12
Click Next to continue.
7. If you enable Set Wireless, the following Site Survey screen will be displayed.
Figure 11: Site Survey Screen
• Select the desired Access Point. If the Access Point does not show up, click the
Refresh button.
• If you select the Manual Setup, click Next to move to the Security Setting screen.
Select the desired Security method (Disabled, WEP or WPA/WPA2 Personal) in the
screen and enter the required data.
8. The next screen, shown below, displays all details of the Network Camera.
• Click Next if the settings are correct
• Click Back to modify any incorrect values.
Figure 12: Save Settings
9. Click OK to confirm that you want to save the new settings. If you want to cancel your
changes, click Cancel.