User's Manual

Chapter 3 ADT Pulse Enrollment
8.
On the Add Camera screen, enter the camera’s MAC ID. Do not click C
Continue
at this time.
9.
Ensure that the camera is connected to the device port of the Gateway using
the Micro USB to RJ-45 Adapter Cable / Ethernet cable and connected to the
supplied 12VDC power adapter.
10.
After the Power and Network LEDs turn on solid green, click Continue.
11.
Wait for the camera to add. It could take a few minutes, especially if an
upgrade is required.
OC835-ADT Outdoor Day/Night HD Camera Installation Guide 11