User's Manual

Chapter 3 ADT Pulse Enrollment
10.
When the Camera Details screen appears, showing that the camera has been
enrolled, assign the OC835-ADT a unique name (usually based on the
location of the camera) in the Name field, and then click Save.
The new camera appears in the Cameras list.
11.
At the top left of the screen, click Go Back.
12.
You are returned to the Manage Devices screen. The total number of installed
cameras has increased by one. Click Close.
13.
Click Close again to confirm.
14.
Disconnect the camera from power.
15.
Install the camera in its final location.
For Wall Mounting, refer to Chapter 4.
16 OC835-ADT Outdoor HD Camera Installation Guide