User's Manual

Chapter 3 ADT Pulse Enrollment
The following screen appears.
8.
Press and hold the WPS/RESET button on the
camera for 5 seconds to establish a wireless
connection.
The Network/WPS LED flashes amber as the TS
Base attempts to connect to the camera. The
wireless connection is successful when the
Network/WPS LED turns solid green.
Note: You must complete the WPS connection
within 2 minutes or else the process will time out.
The time remaining is displayed in the upper left
portion of the screen.
9.
When the Camera Details screen appears, showing that the camera has been
enrolled, assign the OC835-ADT a unique name (usually based on the location
of the camera) in the Name field, and then click Save.
OC835-ADT Outdoor Day/Night HD Camera Installation Guide 19