User's Manual

Chapter 3 ADT Pulse Enrollment
The Pulse enrollment is complete. The newly-added device appears in the
Cameras list.
10.
At the top left of the screen, click Go Back.
11.
Disconnect the camera from power.
12.
Install the camera in its final location.
For Wall Mounting, refer to Chapter 4.
If the Camera Continually Goes Offline
If after enrolling it the camera, it continually goes offline (Power LED blinks
continually), the camera will automatically attempt to recover the wireless
connection. If the camera cannot recover on its own, take the following measures
to re-establish the Wi-Fi connection.
1.
Power cycle the camera.
2.
If the previous measure fails, move the Pulse Gateway closer to the camera.
3.
If the previous measure fails, press the camera’s reset button for 15 seconds,
and then re-enroll the camera into Pulse.
4.
If the previous measure fails, install a Wi-Fi Range Extender model
WN3000RPH-2ADPAS.
20 OC835-ADT Outdoor HD Camera Installation Guide