User's Manual

Chapter 4
Wall Mounting
This section provides details for final mounting of the OC835-ADT Outdoor
Day/Night HD Camera. You should ensure that the camera is configured and
enrolled in ADT Pulse before permanently mounting it.
Mounting Suggestion. To get the best video quality for targets at night,
make sure that the camera’s field of view does not include a large
foreground object, such as tabletop or side wall. If installing on a tabletop,
place the camera as close to the edge as possible. If installing on a wall,
angle the camera so that a minimal portion of the wall is visible.
1
1.
Unscrew the camera stand and remove it from the camera.
2.
Hold the stand at the location where you would like to mount the camera and
mark the location of the two mounting holes.
3.
Drill two pilot holes on the mounting surface at the marked locations.
4.
Align the two mounting holes on the camera stand with the two pilot holes,
and mount the stand to the surface using the two screws supplied.
Figure 6: Installing the Camera Stand
5.
Screw/attach the camera onto the camera stand.
Figure 7: Attaching the Camera
4
OC835-ADT Outdoor HD Camera Installation Guide 21