User's Manual

Chapter 3
ADT Pulse Enrollment
This section provides examples of three different methods for enrolling
the OC835-ADT Outdoor HD Camera into the ADT Pulse network. (1) The first
method uses a wired connection to enroll the HD Camera to a Gateway via the
Pulse Portal. (2) The second method, which uses WPS to wirelessly enroll the HD
Camera to a Gateway via the Pulse Portal, is described on page 13. (3) The third
method, which uses WPS to wirelessly enroll the HD Camera to an ADT Total
Security (TS) Base panel via the TS Installer App, is described on page 17.
Wired Connection to the Gateway Using the Pulse Portal
1.
Set up the camera, as described in the previous chapter.
2.
Open a web browser and in the address bar, enter:
https://Portal.ADTPulse.com.
3.
Type your Username and Password, and then click the Sign In button.
4.
Click the System tab, and then click the Manage Devices button.
3
OC835-ADT Outdoor HD Camera Installation Guide 9