User's Manual

Using the Windows Utility
13
WPS Screen
WPS (Wi-Fi Protected Setup) can simplify the process of connecting any device to the wire-
less network by using the push button configuration (PBC) on the Wireless Access Point, or
entering a PIN code.
You will see the WPS screen when you try to connect the wireless network with the WPS
function.
Figure 9: Wi-Fi Protected Setup Screen
Data - Wi-Fi Protected Setup Screen
WPS Status
The image indicates the status of WPS.
Join a Wireless Network
Network Name
Select the desired network name from the list.
Push the Button on
my access point
Push the WPS button of the access point and enable this button.
Enter a PIN into my
access point
Enable this and enter the PIN code displayed in the following field
to the WPS screen of the access point.
Enter a PIN from
my access point
Enable this and enter the PIN code of the access point in the fol-
lowing field.
Start
Click this button to start the WPS process.