User's Manual

Wireless USB Print Server User Guide

2. Reconnect the power adapter to restart the print server. The print server should now establish a

wireless connection to your wireless router or access point.

3. Repeat the instructions from

Step Three: Print a Test Page. If you are able to print, your

wireless connection is working correctly. If you are not able to print the test page, there is a

problem with your wireless connection, see

Troubleshooting.

Step Five: Connect Clients to the Wireless USB Print Server

To connect additional client computers to the printer, you will need to perform the client

installation on each computer.

To install the management tools for the Wireless USB Print server, you need to perform an

Administrator installation.

Congratulations! You have successfully completed the installation procedure. Please register your

Wireless USB Print Server at

www.usr.com/productreg.

To print out a diagnostic page with the setting information for the Wireless USB Print Server, press the

RESET button once.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (17 of 17)9/14/2006 4:35:10 PM