User's Manual

Wireless USB Print Server User Guide
If you see the following error message, either install Internet Explorer 4 or later
or go to
Troubleshooting.
3. The printer port will be created, then a screen similar to the one below will be
displayed.
4. Select the correct Windows printer in the Existing Printers list and click
Connect.
If the correct printer type is not listed, click Add New Printer to run the
Windows Add Printer wizard. Perform the following steps of the Wizard and
install the required printer:
● Select the correct Printer Manufacturer and Model or click Have Disk if you
have the printer manufacturer's Installation CD-ROM.
● It is recommended that you change the Printer name to indicate the device to
which it is connected. (e.g. HP2100 on SCA43600_P1)
● If prompted about Sharing the printer, do not enable Sharing.
● When the Printer installation is finished, it will be listed in the Configure Printer
Port screen. Select the printer and click Connect.
5. Installation is complete and you can now print using this printer.
To install additional Printers, repeat steps 1-4.
To run this program in the future, click Windows Start and then Programs (this may
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/printing.html (8 of 14)9/14/2006 4:38:29 PM