User's Manual

19
 Motion Detection Screen
General Options
These options are always available, regardless of the type of camera you are connected to.
Streaming. Use this drop-down list to select the desired streaming.
Full Size. When using high-resolution mode (1280*720), click this
button to see the full size of the image.
Select the desired option from the drop-down list.
Use this icon to start/stop viewing.
Use this icon to make the image back to original size.
Zoom Out. A digital zoom out feature is available. To zoom out the
window, click this icon.
Zoom In. A digital zoom in feature is available. To zoom in the
window, click this icon.
Snapshot. Click this to take a single JPEG "snapshot" image of the
current video.
Speaker On/Off. Use this button to turn the PC's speaker on or off.
Microphone On/Off. Use this button to toggle the microphone on or
off.
Volume. If Speaker or Microphone is enabled, use this slider to adjust
the volume.
Full Screen Display. Click this button to see the full screen of the
image.
Setup. Select the desired folder to save the file.
ON. Click this to set the output I/O port to ON mode.
OFF. Click this to set the output I/O port to OFF mode.
LED ON. Click this to turn on the White Light LEDs.
Note: If the LEDs are turned on manually, the LEDs will still be lighted
even the interval time is over.
LED OFF. Click this to turn off the White Light LEDs.
Camera Patrol. Move through the Preset positions in the sequence
defined by the Camera Administrator.
Camera Auto Pan. Click this to have the camera moved from left to
right automatically.
Motion Detection. Click this button to have the camera moved to the
Motion Detection Preset position.