User's Manual

RC8326 Wireless Indoor Day/Night HD Camera Installation Guide
9
Chapter 3
ADT Pulse Enrollment
This section provides instructions for wirelessly enrolling the RC8326 HD
Camera into the ADT Pulse network. This process uses the Wi-Fi Protected
Setup (WPS) with PIN method to wirelessly enroll the camera to the
gateway via the ADT Pulse Portal or TS Installer App.
Using WPS with PIN to Enroll the Camera
1. Set up the camera, as described in Chapter 2.
2. Launch an Internet browser and log in to the Pulse portal or TS installer
app.
3. Enter the Manage Devices screen using one of these methods:
• For the Pulse portal, select the System tab and click Manage
Devices.
• For the TS installer app, click the Pulse Devices link.
The Manage Devices screen displays.
4. In the Manage Devices screen, click Cameras.
5. Click the Add Using WPS button at the bottom of the screen.
3