User's Guide

Chapter 2

Initial Installation

This Chapter covers the software installation of the WiFi EasyMesh Router.

Requirements

 Use a standard 10/100/1000 BaseT network (UTP) cable with RJ45 connector for Internet

connection.

Procedure

1. Choose an Installation Site

Select a suitable place to install the WiFi EasyMesh Router.

2. Connect WAN Cable

Use a standard Ethernet cable to connect the device to the WAN port on WiFi EasyMesh

Router. And the other side of Ethernet cable is connected to Home Router or ADSL mo-

dem for Internet connection.

3. Power Up

Connect the supplied power adapter to the WiFi EasyMesh Router. Use only the power

adapter provided. Using a different one may cause hardware damage.

4. Check the LEDs

 The Power LED should be ON.

 The WiFi LED should be ON

 The WAN LED should be ON.