User's Manual

Page 3
Ethernet
(Green)
On - Ethernet connection is active.
Off - No Ethernet connection.
Flashing - Data is being transmitted or received
via the Ethernet Port.
Buttons
WPS
button
WPS button (for Push Button Method only)
Establish a secure connection between the
RP101v2 and Root AP (access point) or Wire-
less Router or IP camera / Client station
WPS between RP101v2 and IP camera / Client
Station:
Press and hold the WPS button, but not no more
than 3 seconds (Quick Push)
WPS between RP101v2 and Root AP (access
point) or Wireless Router:
Press the WPS button and hold for greater than
8 seconds (Long Push)
Reset but-
ton
Reset to the factory default
Press the reset button and hold for greater than
10 seconds, the system will reset to the factory
default setting and reboot the system.
LAN Port
Use a standard LAN cable to connect the
RP101v2 to the IP Camera