RP324 WiFi Extender Quick Start Guide P/N: 95TDASDIES Document Version: 1.1 Copyright 2019. All Rights Reserved.
Glee The following ems are included in the box: 1. RP324 2. Quick Start Guide any of these elms are damaged or missing, please contact your servos provider immediately.
Chapter 1 introduction This chapter provides retells of the RP324's features, components, and capsulizes. The RF324 is designed to enhances the connectivity between your WiFi router and wireless client device while Increasing the coverage of your existing WIFE network. With its simple setup, this high-speed 802.1 {ac extender works seamlessly with most routers. Features « Easy Sat up: WPS button setup or wab browser configuration Wireless Features + Supports tse Wife: 802.
Chapter 2 Basic Setup Thin chapter provides details on how fo setup the RP324. Front Panel Sigurd L: Front Panel 1. Power LED Solid Green Power on {Croon} Off No power Blinking The Prows LED will blink during start up 2. WIFI LED Solid Green Back haul connection Is available and (GresnvBlus/Red) the signal strength is hoed CHT Backache! connection is not established Solid Red Back haul connection is available and the signal strength is poor.
Side Panel Figure 2: Side Panel 1. LAN port Connect other Ethernet device using a standard Ethernet cable. 2, Resat Button This bunion ts recessed: a pin or paper clip can be used to press i The bisection can be used wheels the unit is powered and the power LED is Green. » Reset to manufacturer default values and reboot. When pressed and held over § seconds, the settings of the RF324 will be set fo their default values. + Reboot.
LE The RP324 stands the range of your existing WIFI network without the need for running cables. During the initialization process, the RP324 colonnades io ‘your current WIFI router over WiFi in extend your home network coverage. You can set up your RP324 using WPS or your web browser. Setup Using WES AE Step 1: Make sure ths WIFI] router ls on and working proper, Step 2: Plug the RP324 info a wall outlet near the WF! routs during setup.
Setup Using Wab Browser wR Step 1: Make sure the WIF] router Is on and working property. Bap 2: Plug ths RP324 into a wall cuss! near the WF} router during setup. Step 3: Walt for the Fowler LED to become solid green, the RP324 is now ready for setup, Step 4: Connect an Ethernet cabs to the RP324 and your PC. Bicep 5: Launch the browser and enter in the Address box. Bip 8: You will ba prompted for a use mams and password. Use the default values, admin for the messmate, and Wes PIN for the password.
Step 10: The Extended Network Se lings screen will be propelled automatically If the security is enabled. It is recommended to dick “Cons Settings” to use your stinging WF! router SAID and password or you can enter 2 new SAID and password you would like for the extender network. Click Next. EE Ha SE Step 14: Wail unl the RP324 connects to tis router and the browser moves 10 the System Stet screen. Beep 12: Now move the RP324 in a suitable location.
Appendix A Al Regulatory =A FEC Alabaman This equipment generates, uses, and can radiate radio frequency synergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thees ia no guarantee that interference will nat acct in a particular installation.
