User's Manual

Administering Your Cisco RV180/RV180W
Using the Management Interface
Cisco RV180/RV180W Administration Guide 131
7
DRAFT - CISCO CONFIDENTIAL
management of the Cisco RV180/RV180W by SNMP, under Remote SNMP, check
Enable.
Configuring User Accounts
The Cisco RV180/RV180W supports two user accounts for administering and
viewing settings: an administrative user (default user name: “admin”) and a “guest”
user (default user name: “guest”). The guest account has read-only access. You
can set and change the username and password for both the administrator and
guest accounts.
Configuring Password Aging
STEP 1 Choose Administration > Management Interface > User Accounts.
STEP 2 In the Password Aging section, check Enable to enable password aging. Password
aging requires the user to enter a new password after the password has expired.
STEP 3 Enter the password aging time. This is the number of days before the password
expires.
STEP 4 Click Save.
Configuring Usernames and Passwords
STEP 1 Choose Administration > Management Interface > User Accounts.
STEP 2 Click either Edit Admin Settings or Edit Guest Settings.
STEP 3 Enter the new username.
STEP 4 Enter the old password.
STEP 5 Enter the new password. It is recommended that passwords contains no
dictionary words from any language, and are a mix of letters (both uppercase and
lowercase), numbers, and symbols. The password can be up to 30 characters.
STEP 6 Click Save.