User's Manual

Administering Your Cisco RV180/RV180W
Configuring Network Management
Cisco RV180/RV180W Administration Guide 133
7
DRAFT - CISCO CONFIDENTIAL
STEP 1 In the SNMPv3 User Table, check the box for the user to edit and click Edit.
STEP 2 Under Security Level, choose the amount of SNMPv3 Privileges:
• NoAuthNoPriv—Doesn't require any Authentication and Privacy.
• AuthNoPriv—Submit only Authentication algorithm and password.
• AuthPriv—Submit Authentication/privacy algorithm and password.
STEP 3 If you chose AuthNoPriv or AuthPriv, choose the type of authentication algorithm
(MD5 or SHA) and enter the authentication password.
STEP 4 If you chose AuthPriv, choose the type of privacy algorithm (DES or AES) and enter
the privacy password.
STEP 5 Click Save.
Adding SNMP Traps
The Trap s List Table lists IP addresses of SNMP agents to which the router will
send trap messages (notifications) and allows several operations on the SNMP
agents.
To add a new trap:
STEP 1 In the Trap Table, click Add.
STEP 2 Enter the IP Address of the SNMP manager or trap agent.
STEP 3 Enter the SNMP trap port of the IP address to which the trap messages will be
sent.
STEP 4 Choose the SNMP Version: v1, v2c, or v3.
STEP 5 Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
STEP 6 Click Save.