User's Manual

Setup - WAN Screen

DHCP

By default, the Router’s Configuration Type is set to Automatic Configuration - DHCP, and it

should be kept only if your ISP supports DHCP or you are connecting through a dynamic IP

address.

Figure 3: DHCP Screen

Optional Settings

Host Name

Enter a host name for the Router.

Domain

Name

Enter a domain name for the Router.

MTU

This setting specifies the largest packet size permitted for network transmis-

sion. In most cases, keep the default, Auto. To specify the MTU, select

Manual, and then enter the value in the Size field.

DDNS

Service

Select the desired option from the list.

• Disabled - If selected, no DDNS service will be used.

• DynDNS

• User Name, Password, Host Name - Enter the User Name, Pass-

word, and Host Name of the account you set up with DynDNS.org.

• Custom DNS - Enable the checkbox if you want to use this fea-

ture.

• Status - The status of the DDNS service connection is displayed

here.

• TZO

• E-mail Address, TZO Password, Domain Name - Enter the E-

mail Address, Password, and Domain Name of the account you set