SM-ATK02N Asset Tracker User Guide
SM-ATK02N Asset Tracker Contents SM-ATK02N Asset Tracker 3 Device Specifications 3 Device Lifespan 3 Electrical 3 Mechanical 3 Device notification payload 3 Purchasing the SM-ATK02N Asset Tracker 4 Powering on the device and Installation 5 Optional mounting bracket 6 Device operation and LED behavior 8 How to contact us 9 Frequently Asked Questions (FAQ) 10
SM-ATK02N Asset Tracker SM-ATK02N Asset Tracker The SM-ATK02N Asset Tracker interfaces with Link Labs Asset Management Operations Center server to provide customers with a highly accurate GPS, Wi-Fi, Bluetooth positioning service, and accelerometer and temperature. The device comes with a signed Link Labs certificate for an out-of-the-box experience that requires no device configuration. The SM-ATK02N asset tracker is an IP67 rated device with a 5-color LED indicator.
SM-ATK02N Asset Tracker Powering on the device and installation The device has the power button located on the back side of the device and a LED light indication located on the front of the device. Please note the location of the Power Button and LED Lights To power on the device, press and hold the power button for 3 seconds. The LED light will blink white 3 times during this power on cycle. The device notification cycles will start upon device power on.
SM-ATK02N Asset Tracker The SM-ATK02N Asset Tracker comes with double sided VHB tape to affix the device to flat surfaces. Please ensure you power up the device before you affix the device. Optional mounting bracket An optional mounting bracket for the SM-ATK02N Asset Tracker is available for purchase. Using Screws to affix bracket Customers may use screws, zip ties or VHB tape to affix the mounting bracket to a variety of surfaces.
Using VHB tape to affix bracket Using zip ties to affix bracket SM-ATK02N Asset Tracker After affixing the mounting bracket, insert the asset tracker into the mounting bracket and secure it by tightening the screw located on the bottom.
SM-ATK02N Asset Tracker Device operation and LED behavior The SM-ATK02N asset tracker has has a lifespan of 1080 notifications or 2 years from date of manufacturing, whichever comes first.
SM-ATK02N Asset Tracker Frequency Asked Questions (FAQ) Question Answer How do I power on the device? Device is powered on by pressing/holding the button for 3 seconds. The LED will blink white 3 times to indicate it is powered up. How do I diagnose what is going on with my device? Most of the device diagnostics can be observed from the LED light on the device.
SM-ATK02N Asset Tracker Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.