LL-AF2-ST-SM-ATK42 SuperTag Plus User Guide
LL-AF2-ST-SM-ATK42 SuperTag Plus Contents LL-AF2-ST-SM-ATK42 SuperTag Plus 2 Device Specifications 2 Device Lifespan 2 Electrical 2 Mechanical 2 Device notification payload 2 Powering on the device and Installation 3 Optional mounting bracket 5 Frequently Asked Questions (FAQ) 7 1
LL-AF2-ST-SM-ATK42 SuperTag Plus LL-AF2-ST-SM-ATK42 SuperTag Plus The LL-AF2-ST-SM-ATK42 SuperTag Plus interfaces with Link Labs AirFinder User Interface (app.airfinder.com) to provide customers with a highly accurate GPS, Wi-Fi, Bluetooth positioning service, and accelerometer and temperature. The LL-AF2-ST-SM-ATK42 SuperTag Plus is an IP67 rated device with a 5-color LED indicator. Device Specifications Electrical Lithium manganese oxide 4x2.
LL-AF2-ST-SM-ATK42 SuperTag Plus Powering on the device and installation The device has the multi-function button located on the back side of the device and a LED light indication located on the front of the device. Please note the location of the Power Button and LED Lights Shipping Mode After initial programming, the device will enter a low power shipping mode. In this mode the device will perform no operation other than monitor the pushbutton.
LL-AF2-ST-SM-ATK42 SuperTag Plus Startup from shipping mode: blink blue LED 3 times (exit shipping mode), blink white LED 5 times (application start). Startup/reset normal: blink blue LED 3 times (bootloader), blink white LED 5 times (application start). Operation mode: 1 White blink fast during location scan Cloud sync: see cloud sync behavior Device cannot connect/constantly resetting: the blue LED will blink 3 times, then there will be a pause, and the blue LED will blink 3 more times.
LL-AF2-ST-SM-ATK42 SuperTag Plus Optional mounting bracket An optional mounting bracket for the LL-AF2-ST-SM-ATK42 SuperTag Plus is available for purchase. Using Screws to affix bracket Customers may use screws, zip ties or VHB tape to affix the mounting bracket to a variety of surfaces.
Using VHB tape to affix bracket Using zip ties to affix bracket LL-AF2-ST-SM-ATK42 SuperTag Plus After affixing the mounting bracket, insert the into the mounting bracket and secure it by tightening the screw located on the bottom.
LL-AF2-ST-SM-ATK42 SuperTag Plus Frequently Asked Questions (FAQ) Question Answer How do I power on the device? Device is powered on by pressing/holding the button for 5 seconds. The LED will blink blue 3 times and white 5 times to indicate it is powered up. How do I diagnose what is going on with my device? Most of the device diagnostics can be observed from the LED light on the device.
LL-AF2-ST-SM-ATK42 SuperTag Plus Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
