User's Manual

ManualsBrandsSercomm ManualsElectronicsZigBee Binary Switch

SZ-BSW01 ZigBee Binary Switch Installation Guide

SZ-BSW01 can provide "smart" lighting remote control with its embedded radio frequency (RF) technology that is compatible

with ZigBee enabled devices. This device is designed to give you one-touch control of your home's lighting.

In a ZigBee network, each device is designed to act as a router. These routers will re-transmit the RF signal from one device to

another until the signal is received by the final destination. Using RF technology ensures SerComm to provide great signal through

all the obstacles and radio dead spots. The plug-in Lamp Module of SZ-BSW01 is compatible with any ZigBee enabled network,

regardless of the manufacturer and can also be used with other devices with the ZigBee logo.

CAUTION: Remember to have common sense while using the remote control, especially when scheduling unattended devices.

There can be some unexpected consequences if used without care. For example, if an empty coffee pot is remotely turned on, and

your coffee pot could be damaged from overheating. Or if an electric heater is turned on by remote control while clothing is

draped over it, it may result a fire. DO NOT USE the remote for controlling the high power heating appliances such as portable

heaters. This device will not control lighting used with electronic low-voltage and high frequency power supply transformers, nor

high pressure discharge lamps (HID lighting), which include mercury-vapor, sodium vapor and metal halide lamps. DO NOT

change location after unit is enrolled in ZigBee network.

Specification

Rado Frequency 2.4GHz

RF Communication Range

Open Aire：100M (Max)

LED Indicator Red / Greed LED x 1

Power Source

Input：120 VAC, 0.5A, 50-60 Hz

Output Max Current 10A

Dimensions (H x W x D) 55 mm x 55 mm x 38 mm (2.15” x 2.15” x 1.48”)

Operation Temperature 0° - 50°C (32° - 122°F)

Storage Temperature -20° - 70°C (-4° - 158°F)

Package Contents

Warnings and Cautions

 To be installed and/or used in accordance with appropriate electrical codes and regulations.

 If you are unsure about any part of these instructions, please consult a qualified electrician.

Summary of content (4 pages)

PAGE 1
SZ-BSW01 ZigBee Binary Switch Installation Guide SZ-BSW01 can provide "smart" lighting remote control with its embedded radio frequency (RF) technology that is compatible with ZigBee enabled devices. This device is designed to give you one-touch control of your home's lighting. In a ZigBee network, each device is designed to act as a router. These routers will re-transmit the RF signal from one device to another until the signal is received by the final destination.
PAGE 2
 To reduce the risk of overheating and possible damage to other equipments, do not install for controlling a motor-operated appliance, fluorescent lighting fixture, or a transformer supplied appliance.  Unplug unit when servicing the connected lighting fixtures.  Save this instruction sheet. It contains important technical data along with testing and troubleshooting information, which will be useful for future reference. LEDs Power (Red/Green) On (Red) - When ON/OFF button is pressed to ON.
PAGE 3
Operation 1. ON/OFF Button 2. Join/Leave Button Auto Operation: NOTE: For complete details on operating by the Remote Control, please refer to the individual device’s instruction guide. If a power interruption should occur while the device is ON, the light will return to its previous state when power is restored.  ON: This command will turn on the lights to the previous setting.  OFF: This command will turn the lights off.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.