User's Manual

3. Insert CR2032 Battery

Use care when installing the battery and observe the correct polarity when the battery is inserted. Use only CR2032

batteries for replacement.

WARNING!: Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

4. Use either one of the following methods to install the sensor:

• Remove the back plate of the sensor; use this as the mounting bracket. Use the

screwdriver to secure the back plate to the wall with the screws provided.

• Use provided adhesive on the sensor. Attach the sensor to the door. Press firmly and

hold in place for a few seconds.