User's Manual

2
LEDs
Power (Red/Green)
On (Red) - When ON/OFF button is pressed to ON.
Blinking (Green):
• The LED will blink for 10 seconds when join/leave function is being processed.
• The LED will be on for 2 second and then off when join/leave function is succeeded.
Installation
NOTE: In order to use SZ-ESW01 in a ZigBee network, the device must be joined into the network by using a ZigBee
Coordinator. Please refer to the ZigBee Coordinator instruction sheet for complete information.
1. Put the SZ-ESW01 into wall receptacle. Make sure the receptacle is working properly. If it is controlled by a wall switch,
which must be set to ON all the times.
2. Attach the appliance to the SZ-ESW01.
Operation
1. ON/OFF Button 2. Join/Leave Button
Auto Operation:
NOTE: For complete details on operating by the ZigBee Coordinator, please refer to the individual device’s instruction guide.
If a power interruption should occur while the device is ON, the appliance will be set to off when power is restored.
• ON: This command will turn on the appliance to the previous setting.
• OFF: This command will turn the appliance off.
MANUAL Operation:
• ON: Press the ON/OFF button of the device to turn the appliance on.
NOTE: The appliance will be turned ON regardless of the previous setting.
• OFF: Press the ON/OFF button to turn the appliance off.