User's Manual

4
Operation
 Join Function
For “Join” a network, please do the following instruction:
 Put the ZigBee Coordinator into “Permit-Joining” mode.
 Pressed and hold Reserved
+ Arm All button for 1 second. The LED is flashing while
processing. If the SZ-KFB01 has been joined with the ZigBee Coordinator successfully, the Green
LED will be on for 2 seconds and then off. The Green LED will be off instantly if failed.
 Leave Function
For “Leave” a network, please do the following instruction:
 Pressed and hold Reserved
+ Disarm All button for 3 seconds to let the SZ-KFB01 be
deleted from the ZigBee Coordinator. If the key fob has been deleted successfully, the LED will be
on for 1 second and then off.
 Functions of Keys
Arm All
Press this button to arm your system in Away mode. Both the interior and exterior zones will be
armed, which allows you to exit the premises.
Arm Perimeter
Press this button
to arm your system in Stay mode. All perimeter zones will be armed, such as all
windows and doors. But the interior zones will remain inactive, which allows you to stay in the
premises without setting off an alarm.
Disarm All
Press this button
to disarm your system. Do not have to enter the access code when using this key
to disarm the system.
Troubleshooting
If the key fob is not working properly during the process, please make sure the battery is installed
correctly.