User's Manual

Introduction
7
Rear Panel
Figure 3: Rear Panel
Power port Connect the supplied power adapter here.
10/100BaseT
LAN connections
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Note:
Any LAN port on the ADSL VoIP Router will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Reset Button
(Reset to Defaults)
This button will reset the ADSL VoIP Router to the factory default
settings.
To do this, press and hold the Reset Button for five (5) seconds, until
the Status LED is lit, then release the Reset Button, and wait the
ADSL VoIP Router to restart using the factory default values.
WAN port
(ADSL port)
Connect this port to your ADSL line.
PSTN Port Connect the PSTN line here.
Phone Connect the phone here.
USB (Optional) USB type A male connector.