User's Manual

Setup

Configuration Program

The ADSL VoIP Router contains an HTTP server. This enables you to connect to it, and con-

figure it, using your Web Browser. Your Browser must support JavaScript.

The configuration program has been tested on the following browsers:

• Netscape V4.08 or later

• Netscape 7

• Internet Explorer V5.01 or later

Preparation

Before attempting to configure the ADSL VoIP Router, please ensure that:

• Your PC can establish a physical connection to the ADSL VoIP Router. The PC and the

ADSL VoIP Router must be directly connected (using the Hub ports on the ADSL VoIP

Router) or on the same LAN segment.

• The ADSL VoIP Router must be installed and powered ON.

• If the ADSL VoIP Router's default IP Address (192.168.0.1) is already used by another

device, the other device must be turned OFF until the ADSL VoIP Router is allocated a new

IP Address during configuration.

Using your Web Browser

To establish a connection from your PC to the ADSL VoIP Router:

1. After installing the ADSL VoIP Router in your LAN, start your PC. If your PC is already

running, restart it.

2. Start your WEB browser.

3. In the Address box, enter "HTTP://" and the IP Address of the ADSL VoIP Router, as in

this example, which uses the ADSL VoIP Router's default IP Address:

HTTP://192.168.0.1

4. When prompted for the User name and Password, enter values as follows:

• User name admin

• Password password