User's Manual

Introduction
5
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power LED
(Green)
On - Power on.
Off - No power.
Status LED
(Yellow)
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Upgrade.
LAN For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or
100BaseT) of each port.
• 100BT - This will be ON if the LAN connection is using 100BaseT, and
Blinking if data is being transferred via the corresponding LAN port.
• 10BT - This will be ON if the LAN connection is using 10BaseT, and Blink-
ing if data is being transferred via the corresponding LAN port.
• If neither LED is on, there is no active connection on the corresponding LAN
port.
WLAN LED On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless access point. This
includes "network traffic" as well as user data.
WAN On - ADSL connection is available.
Off - No ADSL connection.
Flashing - Data is being transmitted or received via the ADSL connection.
PSTN On – PSTN connected
Off - No PSTN connection.
Flashing - Talking
Phone On – Phone ready/on-hook
Off – Phone not ready.
Flashing quick- Talking
Flashing slow- Off-hook
Internet On – Internet connected
Off – No Internet connection.
Flashing – Data is being transmitted