User Manual

63
Figure 43: Add Camera from Internet
To associate a camera with the current Channel:
1. Enter the Camera Data on the panel on the right. See below for details.
2. If desired, click the Test button to check that a connection and login can be performed
successfully. Note that if the remote LAN does not currently have an Internet connection,
or the remote camera is not on-line, the test will fail because no connection is possible.
3. Click the Add button. The camera will now appear in the Channel List.
Camera Data - Internet
Local ID This is the name you gave to this camera. This field must be entered.
Camera Name This is the default name for the Wireless Network Camera, and cannot
be changed.
This field will be displayed automatically once a connection to the
Wireless Network Camera has been established.
IP Address Enter the Domain Name or Internet IP address of the desired Wireless
Network Camera.
Port Number Enter the port number used by the Wireless Network Camera for
connections via the Internet The Camera Administrator can advise you
of the port to use. The default value is 1024.