User's Manual

5
(Auto link mode).
• WPS Pin Code Mode. For the Wireless IP Camera with
MPEG4/MJPEG, when pressed and held for over 3 seconds, the
Network Camera will be in the WPS Pin Code mode.
• Reset to manufacturer default value and reboot. When
pressed and held over 10 seconds, the settings of Network
Camera will be set to their default values.
Note:
After this procedure is completed, the Power LED will blink three
times to confirm that the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1. Network Camera
2. Antenna
3. Power adapter
4. Installation CD-ROM
5. Quick Installation Guide