User's Manual

Introduction
Rear Panel
Reset
This button has two (2) functions:
• Reboot. When pressed and released, the Home Monitoring Gate-
way will reboot (restart).
• Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power On.
2. Keep holding the Reset Button down for 8 seconds.
Release the Reset Button. The Home Monitoring Gateway is now using
the factory default values.
ETH (1~2) Port
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Z-Wave Button
Click this button to enable the Z-wave function.
USB (1~2) Port
The two connectors are USB hosts with support for mass storage
devices.
WPS button
Push the WPS button on the device and on your other wireless device to
perform WPS function that easily creates an encryption-secured wire-
less connection automatically.
Power Port
Connect the supplied power adapter here.
3