User's Manual

SNMP
SNMP (Simple Network Management Protocol) allows network supervisors to monitor and
control the Wireless Print Server using network management platforms such as HP OpenView,
IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management program using the
Import-Compile command. Check your management program for details on this procedure.
The MIB files are provided in the Mib folder on the CD-ROM, as follows:
Mib1p.mib Single port models.
Mib2p.mib Models with 2 ports
Configuring the Wireless Print Server for SNMP
Before using a SNMP Management station to manage the Wireless Print Server, the following
settings should be assigned to it, in addition to the IP Address, Gateway Address, and Subnet
Mask.
SNMP Settings
SysContact
Text Field - Name of the contact person.
SysLocation
Text Field - Location of the contact person.
Management Station
IP Address(s)
Up to 4 Management Stations can be entered.
Trap Receiving
IP Address(s)
Up to 4 Trap Receiving Stations can be entered.
Management Station Settings
For each Management Station, the following fields are available:
Access Permission
Options are:
Read Only
Read/Write
Not Accessible
Community String
Leaving this blank will disable management by this station.
Trap Receiving Station Settings
For each Trap Receiving Station, the following fields are available:
Community String
Leaving this blank will disable management by this station.
Trap Enable
Use this option to Enable/Disable Trap Receiving by this
station.
Trap Severity
In this version, all traps are level 1.
Page 57