User’s Guide Model CA-360 Central Alert Operating Guide Thank you for purchasing this product. Please read before use.
Table of Contents CentralAlertTM Features Important safety instructions General Package contents Installation and test Set clock Set alarm time Select 12/24 hour mode Telephone test Doorbell and test CA 360 Accessories list FCC Information/warranty, etc. 1. 2. 3. 4. 4. 5. 5. 6. 6. 7. 7. 8. 9.
CentralAlertTM Features: • 2.4 GHz technology - 360° full coverage of your entire home. • An audio alarm, bright flasher, visual icons, and a bed-shaker to alert you to daily sounds: alarm clock, doorbell, phone/cell/video calls/fax, smoke/gas alarms, a baby’s cry, a weather warning, a motion sensor, and more. • A large, easy-to-see clock with dual alarms. • Dual bed shaker output jacks (one bed shaker included). • No installation needed - just “plug and use.
Important Safety Instructions: When using a CentralAlertTM Model CA-360, in order to reduce the risk of fire, electric shock or injury to persons, basic safety precautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read all instructions before using appliance. This product uses rechargeable batteries. Do not use nonrechargeable batteries as charging of this type can cause battery leakage.
General: CentralAlert™ Model CA-360 is an advanced wireless visual alert system for the hard-of-hearing (HOH). It also serves as a dual-alarm clock with a 1.25” high digital display (green in color). It uses an exclusive Smart-Code technology and operates in the 2.4 GHZ band. This technology offers a fast response and long range operation. It can support thousands of systems without the need for channel-setting switches.
Master-Unit Installation and Testing: 7 6 5 4 2 3 1. Install four AA size rechargeable NiMH batteries (user provided) in battery compartment at bottom of unit. Warning: Do not use regular batteries as charging of this type can cause battery leakage and damage to the CentralAlertTM unit. (The unit works without batteries; they may be inserted for back up, in case of power outage) 2. Plug AC adapter into nearest electrical outlet and connect adapter plug to CentralAlertTM Master-Unit as shown. 3.
Set the Alarm Time: 1. Slide SET switch (on right side of unit) to Alarm-1 (AL 1) position and set alarm time using HR and MIN buttons. Holding in HR/MIN switch to forward the hours will not work. Push button repeatedly. 2. After completing the setting, slide SET switch to RUN position for normal clock operation. 3. Select the front panel wake-up option on SHAKER or ALL setting. SHAKER means to wake-up via the “bed-shaking and flasher only” functions (using no speaker).
Telephone Function Test: 1. Place a call to the phone number corresponding to PHONE -1. 2. Verify that all alerting outputs operate properly while phone is ringing. 3. Verify that by answering the call (from any phone), all alerting outputs stop immediately. 4. The PHONE -2 jack is available for connection to a second phone-line. This second line can be a regular phone line, FAX line, or video-phone line. Doorbell and Test: 1.
Accessories For the CentralAlertTM Master unit: Model CA-AX: A wireless audio alarm sound monitor Model CA-BX: A real-time wireless baby-crying sound monitor Model CA-CX: A wireless cell-phone ringing detector Model CA-DB: An extra wireless door-bell unit Model CA-DX: A wireless door knocking sensor Model CA-LX: An external lamp module allowing CentralAlert to control a 100 watt desk lamp Model CA-MX: A wireless motion sensor to detect a person walking Model CA-NOAA: A wireless NOAA (weather
1. FCC Information for USA customers only This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier of [US:SNEMO10B-CA1]. If requested, this number must be provided to the telephone company. If this equipment, Central Alert, causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required.
to Serene Innovations. Serene Innovations will either repair or replace the unit (with a refurbished unit or a unit of equal condition) and return it to you (using UPS/USPS ground shipping) at no cost to you, if the unit is returned within 30 days of purchase. If the unit is returned after 30 days of purchase, but within the warranty period, there will be a warranty handling charge of $9.95 for each return. Incidental or Consequential Damages: Neither Serene Innovations, Inc.
may connect to your line, as determined by the 1.0B, contact your local telephone company to determine the maximum 1.0B for your calling area. If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advanced notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you may try one the following methods to correct the interference: 1.
combination of devices, subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. This Class B digital device complies with Canadian ICES-003. =========================================================== 13.
