User's Manual

7.
Telephone Function Test
:
1. Place a call to the phone number corresponding to
PHONE -1
.
2. Verify that all alerting outputs operate properly while phone is ringing.
3. Verify that by answering the call (from any phone), all alerting outputs stop
immediately.
4. The
PHONE -2
jack is available for connection to a second phone-line.
This second line can be a regular phone line, FAX line, or video-phone line.
Doorbell and Test:
1. Insert one “coin battery” into doorbell unit (use a small screwdriver to open
back of doorbell casing).
2. Activate doorbell button 50 ft from CentralAlert
TM
Master-Unit. Confirm that
all alerting outputs respond correctly and last for 30 seconds. Verify that
display shows
dr – 1.
3. Separate mounting plate from doorbell and install plate near door using two
wood screws as shown below.
4. Complete installation by snapping doorbell back onto mounting plate.