Technical information

- -
13
1. While in standby mode, pressing „SET TIME” once and the machine will
announce the current day/time setting. If day/time was not set, it will
announce “Please set day and time”.
2. To set day and time, press and hold “SET TIME” key for 3 seconds until it
announces “Set year”. The display shows the last two digits of the year, for
example “10”. Press “Vol. +” or “Vol. –“ key to change the year.
3. Press “SKIP” once to save, then the machine announces “Set month”. The
display shows the month, for example “1”. Press “Vol. +” or “Vol. –“key to
change the month.
4. Press “SKIP” once to save and then the machine announces “Set date”.
The display shows the date, for example “01”. Press “Vol. +” or “Vol. –“key
to change the date.
5. Press “SKIP” once to save and then the machine announces “Set hour”.
The display shows the hour, for example “00” Press “Vol. +” or “Vol. –“key
to change to the correct hour. (The clock is in the 24-hour format, if it is 5 in
the afternoon, you need to set it to 17. But the VM-150 will announce in the
12 hour format; for example, it will say “5PM”.
6. Press “SKIP” to save and then the machine announces “Set minute”. The
display shows the minute, for example “00”. Press “Vol. +” or “Vol. –“key to
change to the correct minute.
7. Press “SET TIME” to save and it will announce the current day/time setting,
for example: “November 9, 2011, 5:15 PM”
Note: Unless you have installed the power back up batteries, the
day/time setting will be lost when the power cord is unplugged or when
there is a power outage.